User's Manual Part 1

錯誤! 尚未定義樣式。
Wireless Networking Gateway System Manual
3-7
Status
The Status window appears in the main window upon successful log in.
The window can be accessed at any time by clicking on the Status
menu on the menu list.
Figure 6: System Status
The Status window provides information for observing the product's
working status:
 Remaining Lease Time - A counter displaying the remaining time (in
hh:mm:ss) in which the user will be allocated the specific IP address.
When the lease time expires, a new IP address will be automatically
allocated, or the lease will be automatically renewed, depending on
the settings.
¾ Renew – Click to reset the Lease Time.
 IP Address – The WAN IP address. (The default is 192.168.254.253)
¾ Release – Click to release the IP address.
¾ Disconnect/Connect – When in PPPoE or PPTP mode, click
Disconnect to terminate session, or Connect to initiate a
session.
 Subnet Mask – The Subnet mask of the device. (The default is
255.255.255.0)
 Gateway – The Gateway IP address.
 Domain Name Server – The server's domain name
刪除: Set TCP/IP Protocol
for Working with NAT
Router
刪除: Wizard