User's Manual Part 1

錯誤! 尚未定義樣式。
Wireless Networking Gateway System Manual
2-7
7. Connect the 10/100Base-T Ethernet connectors to the data
equipment. The length of the Ethernet cables should not exceed
100m.
8. If a printer is to be used, connect it to the USB port using a
standard USB cable. To configure the Print Server on your
computer(s), refer to Appendix A - Print Server
.
9. Configure the network settings of the computers for proper
operation with the Wireless Networking Gateway. The default IP
address of the Wireless Networking Gateway is 192.168.123.254,
and the default subnet mask is 255.255.255.0. Refer to Appendix B
- TCP/IP Configuration for Windows 95/98.
10. To verify data connectivity, from the end-user’s PC or from a
portable PC connected to the unit, try to connect to the Internet.
11. Verify proper operation using the LED indicators (see Table 2-1
on
page 2-3).
刪除: Set TCP/IP Protocol
for Working with NAT
Router
刪除: Wizard
刪除:
T
able 2-1