User's Manual

5. L2TP Account and Password: The account and password your ISP assigned to you. If

you don't want to change the password, keep it blank.

6. Connection ID: Optional. Input the connection ID if your ISP requires it.

7. Maximum Idle Time: The time of no activity to disconnect your L2TP session. Set it to

zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is enabled, this

device will connect with ISP automatically, after system is restarted or connection is

dropped.

8. Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send

outgoing packets.

Auto Reconnect (Always-on): The device will link with ISP until the connection is

established.

Manually: The device will not make the link until someone clicks the

connect-button in the Status-page.

9. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default

MTU value is 0 (auto).

3.1.2. DHCP Server

1. DHCP Server: Choose either Disable or Enable. If you enable the DHCP Server function,

the following settings will be effective.

2. IP Pool Starting/Ending Address: Whenever there is a request, the DHCP server will

automatically allocate an unused IP address from the IP address pool to the requesting

computer. You must specify the starting / ending address of the IP address pool.

3. Lease Time: DHCP lease time to the DHCP client.

4. Domain Name: Optional, this information will be passed to the clients.

Press “More>>” and you can find more settings

5. Primary DNS/Secondary DNS: Optional. This feature allows you to assign a DNS

Servers