User's Manual

and designated Gateway provided by your ISP.

4. L2TP Account and Password: The account and password your ISP assigned to

you. If you don't want to change the password, keep it blank.

5. Maximum Idle Time: The time of no activity to disconnect your L2TP session. Set

it to zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is

enabled, this device will connect with ISP automatically, after system is restarted

or connection is dropped.

6. Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send

outgoing packets.

Auto Reconnect (Always-on): The device will link with ISP until the

connection is established.

Manually: The device will not make the link until someone clicks the

connect-button in the Status-page.

7. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The

default MTU value is 0 (auto).

3.1.2 DHCP Server

1. DHCP Server: Choose either Disable or Enable. If you enable the DHCP Server

function, the following settings will be effective.

2. IP Pool Starting/Ending Address: Whenever there is a request, the DHCP

server will automatically allocate an unused IP address from the IP address pool

to the requesting computer. You must specify the starting / ending address of the

IP address pool.

3. Lease Time: DHCP lease time to the DHCP client.