User's Manual

connect-button in

the Status-page.

3. Maximum Idle Time: the amount of time of inactivity before disconnecting your

PPPoE session. Set it to zero or enable “Auto-reconnect＂ to disable this

feature.

4. PPPoE Service Name: Optional. Input the service name if your ISP requires it.

Otherwise, leave it blank.

5. Assigned IP Address: It is required by some ISPs. (Optional)

6. Maximum Transmission Unit (MTU):

Most ISP offers MTU value to users. The

default MTU value is 0 (auto).

7. NAT disable: The device would not send private IP to other LAN PC if you select

disable.

D. PPTP

1. IP Mode: Please check the IP mode your ISP assigned, and select “Static IP

Address” or “Dynamic IP Address”.

2. My IP Address and My Subnet Mask: The private IP address and subnet mask

your ISP assigned to you.

3. Gateway IP and Server IP Address/Name: The IP address of the PPTP server

and designated Gateway provided by your ISP.

4. PPTP Account and Password: The account and password your ISP assigned to