User's Manual

20
Auto Reconnect (Always-on): The device will link with ISP until the
connection is
established.
Manually: The device will not make the link until someone clicks the
connect-button in
the Status-page.
4. NAT disable: The device would not send private IP to other LAN PC if you select
disable.
C. PPP over Ethernet
1. PPPoE Account and Password: The account and password your ISP assigned
to you. For security, this field appears blank. If you don't want to change the
password, leave it blank.
2. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing
packets.
Auto Reconnect (Always-on): The device will link with ISP until the
connection is
established.
Manually: The device will not make the link until someone clicks the