User's Manual

27
dropped.
7. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.
8. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The default
MTU value is 0 (auto).
3.1.2. DHCP Server
1. DHCP Server: Choose either Disable or Enable. If you enable the DHCP Server function,
the following settings will be effective.
2. IP Pool Starting/Ending Address: Whenever there is a request, the DHCP server will
automatically allocate an unused IP address from the IP address pool to the requesting
computer. You must specify the starting / ending address of the IP address pool.
3. Lease Time: DHCP lease time to the DHCP client.
4. Domain Name: Optional, this information will be passed to the clients.
Press “More>>” and you can find more settings
5. Primary DNS/Secondary DNS: Optional. This feature allows you to assign a DNS
Servers
6. Primary WINS/Secondary WINS: Optional. This feature allows you to assign a WINS
Servers
7. Gateway: Optional. Gateway Address would be the IP address of an alternate Gateway.
This function enables you to assign another gateway to your PC, when DHCP server
offers an IP to your PC.
Click on “Save” to store your settings or click “Undo” to give up the changes.