User's Manual

Table Of Contents

3.1.1. Network Setup

1. LAN IP Address: The local IP address of this device. The computers on your network

must use the LAN IP address of this device as their Default Gateway. You can change it

if necessary.

2. Subnet Mask: Input your Subnet mask. (All devices in the network must have the same

subnet mask.) The default subnet mask is 255.255.255.0.

3. Combo WAN Status: The option can let you configure Combo WAN setup for dual

WAN Load Sharing or setup for Fail-over mechanism. You will need to configure primary

WAN type prior to configure this option.

4. WAN Interface: Select Ethernet WAN or Wireless WAN to continue.

5. WAN Type: WAN type of your ISP. You can choose WAN Type from the options.

1. Disable: Select “Disable” to disable the Combo WAN Mode

2. Load Sharing: WAN Connection Lists: When Primary WAN type is Ethernet Wan type,