User Manual

3.2.4.1 System Log
This page supports two methods to export system logs to specific destination by means of syslog (UDP)
and SMTP (TCP). The items you have to setup including:
1. IP Address for Syslog
Host IP of destination where syslog will be sent to.
Check Enable to enable this function.
2. E-mail Alert Enable
Check if you want to enable Email alert (send syslog via email).
A. SMTP Server IP and Port
Input the SMTP server IP and port, which are concated with ':'. If you do not specify port number,
the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
B. SMTP Username/Password
The username and password login the SMTP server.
C. E-mail address
The recipients who will receive these logs, you can assign more than 1 recipient, using ';' or ',' to
separate these email addresses.
D. E-mail Subject
The subject of email alert, this setting is optional.
3. View Log...:
Reference the Section 3.2.5.1 System Info.
Click on “Save” to store what you just select or “Undo” to give up
註解 [026]: 應改為
註解 [027]: 應改為