User Manual

L2TP
First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address. For
example: Use Static, the private IP address, subnet mask and WAN Gateway IP are your ISP
assigned to you.
1. Server IP Address/Name: the IP address (or URL) of the L2TP server.
2. L2TP Account and Password: the account and password your ISP assigned to you. For
security, this field appears blank. If you don't want to change the password, keep it empty.
3. Maximum Idle Time: the time of no activity to disconnect your L2TP session. Set it to zero
or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product
will connect to ISP automatically, after system is restarted or connection is dropped.
4. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing
packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the connect-button in
the Status-page.
5. MTU (Maximum Transmission Unit): Most ISP offers MTU value to users. The default
value is 0 (Auto).