User's Manual

b. Screw the antenna in a clockwise direction to the back panel of the unit.
c. Once secured, position the antenna upward at its connecting joint. This will
ensure optimal reception.
2. Connect a
USB modem with service to the WiFi Combo Broadband Router in
one of the following ways:
Æ
You can plug your USB modem into the USB interface---see Picture 2.2
Picture 2.2
Note:
The WiFi Combo Broadband Router is designed to work with either
UMTS or EV-DO and even HSDPA 3G card that can be used as a modem
(support tethered data). Please refer to your service provider for detailed
feature information.
3. Insert the Ethernet patch cable into LAN Port on the back panel of the WiFi
Combo Broadband Router, and an available Ethernet port on the network
adapter in the computer you will use to configure the unit.-see Picture 2.3