User's Manual

51
3.3.2.2 Syslog
With enabling Syslog function, this device will send log to certain host periodically. You need to
install a syslog utility on a host to receive syslogs.
IP Address for Sys log: Host IP of destination where sys log will be sent to. Check Enable to
enable this function.
3.3.2.3 E-mail Alert
This page support two methods to export system logs to specific destination by means of syslog
(UDP) and SMTP(TCP).
1. Setting of E-mail Alert: Check if you want to enable Email alert (send syslog via email).
2. SMTP Server:Port: Input the SMTP server IP and port, which are connected with ':'. If you
do not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
3. SMTP Username: Input username of your account on this SMTP server.
4. SMTP Password: Input password of your account on this SMTP server.
5. E-mail address: The recipients who will receive these logs, you can assign more than 1
recipient, using ';' or ',' to separate these email addresses.
6. E-mail Subject: The subject of email alert, this setting is optional.