User's Manual

3.2.4.2 Firmware Upgrade
You can upgrade firmware by clicking “Upgrade” button.
3.2.4.3 Backup Setting
You can backup your settings by clicking the “Backup Setting” button and save it as a bin file.
Once you want to restore these settings, please reference the Section 3.2.5.2 Firmware
Upgrade.
3.2.4.4 Reset to Default
You can also reset this product to factory default by clicking the Reset to default button.
3.2.4.5 Reboot
You can also reboot this product by clicking the Reboot button.
3.2.4.6 Miscellaneous
1. MAC Address for Wake-on-LAN
Wake-on-LAN is a technology that enables you to power up a networked device remotely.
In order to enjoy this feature, the target device must be Wake-on-LAN enabled and you
have to know the MAC address of this device, say 00-11-22-33-44-55. Clicking "Wake up"
button will make the router to send the wake-up frame to the target device immediately.
2. Domain Name or IP address for Ping Test
You can key in URL or IP address, and then click the “Ping” button for test.