User's Manual

2. Configuring Wireless WAN Mobile broadband Router
2.1. Installation Considerations
The WiFi Mobile Broadband Gateway allows you access your network using a
wireless connection, from virtually anywhere within its operating range. Keep in mind
however, that the number, thickness, and location of walls, ceilings, or other objects
that the wireless signals must pass through, may limit this range.
Typical ranges vary depending on the types of materials used, and background RF
(radio frequency) noise in your home or business.
To maximize your wireless range, please follow these guidelines:
1. Keep the number of walls and ceilings between the WiFi Mobile Broadband
Gateway and other network devices to a minimum. Each wall or ceiling can
reduce the Wireless WAN Mobile Broadband Router’s range from 3-90 feet (1-30
meters).
Note: The same considerations apply to your broadband EVDO connection.
2. Keep your product aware from electrical devices (such as microwaves, air
conditioners, and televisions) that emit large quantities of RFI (Radio Frequency
Interference).
2.1.1. Installation Instructions- Get Start Networking
Connect the WiFi Mobile Broadband Gateway to Your Network
Note: DO NOT switch on WiFi Mobile Broadband Gateway before performing
the installation steps below.
1. Turn off the power switch.
2. Attach the Li-ion battery. ---picture 2.1
Picture 2.1