User Manual

6
1.2.2 LED indicators
LED Status Description
Status LED
Green Power ON
Green USB storage attached
Green in flash Data access
USB LED
Green in flash
then stop
Press ‘USB off’ button till LED flashing, then
can remove USB storage when LED stop
flashing.
Green It is connected to local Ethernet.
WAN LED
Green in flash Data access
Green RJ45 cable is plugged
Ethernet LED
Green in flash Data access
Green WLAN is on
WiFi LED
Green in flash Data access
Power LED Green Power ON
How to Operate
DO NOT connect WiFi Broadband Router to power before performing the
installation steps below.
Step 1.
Screw the antenna in a clockwise direction
to the back panel of the unit.
Step 2.
Plug the RJ45 cable into LAN port 1~4 and
connect with your PC or NB.