User Manual

3.1 Basic Setting

3.1.1 Network Setup

There are two ways to configure the network, respectively LAN Setup and Internet

setup.

3.1.1.1 LAN type

1. LAN IP Address: The local IP address of this device. The computer on your

network must use the LAN IP address of this device as their Default Gateway.

You can change it if necessary.

2. Subnet Mask: Input your Subnet mask. (All devices in the network must have the

same

subnet mask.) The default subnet mask is 255.255.255.0.

3.1.1.1 Internet Setup

1. WAN Interface: Select Ethernet WAN or Wireless WAN to continue.

2. WAN Type: WAN connection type of your ISP. You can click WAN Type combo

button to choose a correct one from the following options:

Ethernet WAN