User's Manual Part 1

77
3.5.3 FTP Service Configuration
These settings are for FTP service.
1. FTP: Enable or disable functions of FTP server on this device.
2. FTP Port:
The default port is 21, but sometimes you might want to hide your FTP service by
changing it. We have the ability to receive the request on non-standard FTP port, but
please be noted, some NAT router could not support non-standard FTP port, that means
some of your clients might have to use passive mode to get file.
3. FTP Max Connection per IP: You can limit the maximum number of FTP connection for
each client.
4. FTP MAX Clients: You can indicate how many FTP clients can access the FTP service
on this device at the same time.
5. Client Support UTF8:
This option is used when your FTP client could support UTF8. Usually, the default value
“No” is okay for most clients.
3.5.4 Access Control
The default setting is “Guest mode”, all clients could access as anonymous users.
If you want to control the permission, change to “Authorization mode” and save it, then go to “User
Configuration”.