User's Manual Part 1

75
3.4.9 VLAN
The VLAN function allows you to divide local network into different “virtual LAN”. In some
cases, ISP may need router to support “VLAN tag” for certain kinds of services (e.g. IPTV) to
work properly.
There are four LAN ports with this router, so you can have up to 4 VLAN if required. Those four
LAN ports belong to one VLAN by default. If you want to divide them into different VLAN, you
just need to assign different “VID” for them. If ISP requests a “VLAN Tag” with your outgoing
data, please remember to check the checkbox of “Tx TAG”.
For detailed configuration of VLAN, please press button “VLAN Settings” to continue.
1. VID: Select which VID you want to configure.
2. LAN Status and DHCP Select: there are two options: NAT or Bridge.
If choose NAT: The NAT function is activated, and you can select one of DHCP server
configurations to apply to this VID.
If choose Bridge: The NAT function is deactivated, and WAN traffic will be transferred to
local LAN port which has same VID.