User's Manual Part 1

3.4.8 IPv6

This device supports several IPv6 applications. You can choose Static IPv6, DHCPv6,

PPPoEv6, 6to4, and IPv6 in IPv4 tunnel according to your requirements.

3.4.8.1 Static IPv6

1. IPv6: Disable or enable the IPv6 functions.

2. IPv6 Connection: you can choose Static IPv6 from the list.

3. WAN IPv6 address settings: you can add IPv6 address / subnet prefix length / default

Gateway / Primary DNS address and secondary DNS address.

4. LAN IPv6 address settings: you can add LAN IPv6 address, and IPv6 Link-Local address

will be showed automatically.

5. Address auto configuration setting: Disable or enable this auto configuration setting.

You may set stateless or stateful( Dynamic IPv6), and also check if need to send Router

advertisement messages periodically.