User's Manual Part 1

64
System will show you all your QoS rule as below
Note 1. : You can move up or down the priority of all rules by pointing the ‘↑’or ’↓’ if you
want to change the priority.
Note 2. : You can unmark any rule if you do not want it enable now.
Provide different priority to different users or data flows, or guarantee a certain level of
performance.
1. QOS Control: Check Enable to enable this function.
2. Bandwidth of Upstream: Set the limitation of upstream bandwidth
3. Local IP : Ports: Define the Local IP address and ports of packets
4. Remote IP : Ports: Define the Remote IP address and ports of packets