User's Manual Part 1

62
5. Create a QoS Rule : you can enable the rule, and select QoS class type as below.
Class : You can create your own QoS rule by different classes as below.
Class Description
IP IP address base
N TCP port
UDPPORT UDP port
MAC MAC base
DSCP DSCP base
Function : you can set your own function value to enable your QoS rule as below.
Function Description Data
PRI Priority 1~6
MAXR Maximum bandwidth Rate KBps/MBps
MINR Minimum bandwidth Rate KBps/MBps
SESSION Connection session number
DROP Drop packet None
LOG Log event None
ALERT Alert event None
Direction : you can select inbond/ outbond for your direction.
Direction
IN inbond
OUT outbond
BOTH inbond & outbond