User's Manual Part 1

54
1. Name: Input a name of this profile.
2. Peer IP/Domain: Input the IP address or domain name of remote PPTP server.
3. User name: enter the user name to dial to remote PPTP server.
4. Password: enter the password to dial to remote PPTP server.
5. Default Gateway: If check this checkbox, all traffic will be routed to remote PPTP server.
6. Peer Subnet: Only the destination in this peer subnet will be routed to remote PPTP server.
7. Local IP: You can set a fixed IP address of this PPTP connection.
8. Remote IP: Indicate a peer IP address of PPTP connection.
9. Connect: You can choose on-demand, auto, or manual to trigger this connection.
10. Option: Options for connection.
11. Authentication: You need to enable this option if remote PPTP server requests it.
12. Encryption Mode: You can choose different ways for encryption. The encryption you choose
must be supported by remote PPTP server.
13. LCP Echo Type: Choose the way to do connection keep alive.