User's Manual

Step2: Open the command mode and input “cmd” then check if the router replies to ping

192.168.123.254

Step3:Please use the exe-file of fw and click as below:

Then click” Upgrade” if necessary, please input password ”admin” .Then reset to default and refer to

Q1 How to connect Router.

However, if those methods can not make the router normal, please send the unit to the seller to check,

thanks.

5.Why can I not connect Internet even though the cables are plugged in Wan

port and Lan port and the leds are blink. In addition, Status led is also normal

and I can configure web management?