User's Manual

4.4.3 Wireless Setting, 802.1X setting and WDS

Wireless settings allow you to set the wireless configuration items.

Wireless : The user can enable or disable wireless function.

Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations

can roam freely over this product and other Access Points that have the same Network ID. (The factory

setting is “default”)

SSID Broadcast: The router will Broadcast beacons that have some information, including ssid so that

The wireless clients can know how many ap devices by scanning function in the network. Therefore,

This function is disabled, the wireless clients can not find the device from beacons.

Channel: The radio channel number. The permissible channels depend on the Regulatory Domain.

The factory setting is as follow: channel 1-11 for North America(FCC) & Taiwan(NCC); channel 1-13 for

European (ETSI).

Remark: For US(FCC)

and Taiwan(NCC) market , channels 12-13 will be disabled by firmware in the factory.

Security: Select the data privacy algorithm you want. Enabling the security can protect your data while

it is transferred from one station to another.