User's Manual

4.1 Login to Configure from Wizard

Activate your browser, and disable the proxy or add the IP address of this product into the

exceptions. Then, type this product’s IP address in the Location (for Netscape) or Address (for IE)

field and press ENTER. For example: http://192.168.123.254.

After the connection is established, you will see the web user interface of this product. There are two

appearances of web user interface: for general users and for system administrator.

To log in as an administrator, enter the system password (the factory setting is ”admin”) in the

System Password field and click on the Log in button. If the password is correct, the web appearance

will be changed into administrator configure mode. As listed in its main menu, there are several

options for system administration.

The user can setup step by step to finish the connection with Wizard.

Setup Wizard will guide you through a basic configuration procedure step by step.Press ”Next >”