User's Manual

E. L2TP

1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet

WAN connection is broken, the device will automatically activate the WWAN

connection and keep you connected to internet with the alternative WWAN broadband

service. Meanwhile, if the device detected that the Ethernet WAN connection is

recovered, your broadband connection will be switched to use the Ethernet WAN

service

2. IP Mode: Please check the IP mode your ISP assigned, and select “Static IP Address”

or “Dynamic IP Address”.

3. My IP Address and My Subnet Mask: The private IP address and subnet mask your

ISP assigned to you.

4. Gateway IP and Server IP Address/Name: The IP address of the L2TP server and

designated Gateway provided by your ISP.

5. L2TP Account and Password: The account and password your ISP assigned to you.