User's Manual

D. PPPoA

1. LAN IP Address: The local IP address of this device. The computer on your

network must use the LAN IP address of this device as their Default Gateway.

You can change it if necessary.

2. PPPoA Account ,Password, Primary and Secondary DNS:

Enter the proper settings provided by your ISP.

3. Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send

outgoing packets.

Auto Reconnect (Always-on): The device will link with ISP until the

connection is established.

Manually: The device will not make the link until someone clicks the

connect-button in the Status-page.

4. Maximum Idle Time: the time of no activity to disconnect your PPTP session.

Set it to zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect