User's Manual

combo button to choose a correct one from the following options:

z Ethernet Over ATM(RFC1483 Bridged) with NAT

z IP over ATM(RFC 1483 Routed)

z PPP over Ethernet

z PPP over ATM

2. Activate WWAN for Auto-failover : Once you enable this function, you

have to input WWAN information for 3G Auto-Backups (see as WWAN 3G

portion). Host Name : ISP host name

3. PPPoA Account: input your account

4. PPPoA Password: input your password

5. Primary DNS and Secondary DNS

6. ISP registered MAC Address

7. Connection Control : you can choose Connect-on-demand, Auto

Reconnect(always-on) and Manually.

8. Maximum idle time : 600 seconds

9. NAT disable: If you enable this option, the device would not transfer the

LAN IP to WAN IP, it will behave like a pure router.

10. Data Encapsulation: Vc-MUX and LLC, these two options depend on

your ISP setting.

11. VPI and VCI, Schedule Type: these values depend on your ISP setting.