User's Manual

57
Manually: The device will not make the link until someone clicks the connect-button in
the Status-page.
8. Option:
MPPE: The MPPE
encryption supports.
NAT: The Nat Traversal supports.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
3.3.10 VPN-PPTP Server
The configuration is the same as L2TP.
1. VPN-PPTP Server: Click “enable” to enable the function of VPN-PPTP Server.
2. IP Pool Start Address: The start virtual IP Address that sends to the client.
3. IP Pool End Address: The end virtual IP Address that sends to the client.
4. Authentication Protocal: User can choose authentication protocol such as PAP,
CHAP,MS_CHAP and MS_CHAPv2.