User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 92
3.2.3.6 GRE Tunnel
1. Default Gateway: You can choose a tunnel as the default gateway for WAN
connection.
2. Names: The name of this GRE tunnel.
3. Tunnel IP: Assign a virtual IP address of this tunnel.
4. Peer IP: Enter the IP address of remote host that you want to connect.
5. Key: Enter the password to establish GRE tunnel with remote host.
6. TTL: Time-To-Live for packets. The value is within 1 to 255. If a packet passes
number of TTL routers and still can't reach the destination, then this packet will
be dropped.
7. Subnet: Enter the local subnet of remote host. If a packet wants to go to this
subnet, the GRE tunnel will be established automatically
8. Enable: Enable or Disable this GRE tunnel.
Click on “Save” to store what you just select or” Undo” to give up