User's Manual

WiFiBroadbandBG
BDE761AM-001 User Manual   91
3. Name: The name of this rule.
4. Peer IP/Domain: The IP address or Domain name of remote L2TP server.
5. User Name: The user name which is provided by remote L2TP server.
6. Password: The password which is provided by remote L2TP server.
7. Default Gateway: You can check the “Enable” checkbox to set this tunnel as the
default gateway for WAN connection.
8. Peer Subnet: The LAN subnet of remote L2TP server.
9. Connect: There are three options for users to choose when the L2TP tunnel will
be established. You can choose “Connect-on-Demand”, “Auto Reconnect
(always-on)”, or “Manually”.
10. Option: Enable or disable MPPE, NAT, and CCP function. If you enable MPPE,
then this L2TP tunnel will be encrypted.
11. Authentication: You need to enable this option if remote PPTP server requests
it.
12. Authentication Protocol: You can choose authentication protocol as PAP,
CHAP, MSCHAP(v1), or MSCHAP(v2). The protocol you choose must be
supported by remote L2TP server.
13. LCP Echo Type: Choose the way to do connection keep alive.
Click on “Save” to store what you just select or” Undo” to give up