User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 90
different from IP address of PPTP server and LAN subnet of VPN gateway.
4. IP Pool Starting Address: This device will assign an IP address to remote L2TP
client. This value indicates the beginning of IP pool.
5. IP Pool Ending Address: This device will assign an IP address to remote L2TP
client. This value indicates the end of IP pool.
6. Authentication Protocol: You can choose authentication protocol as PAP,
CHAP, MSCHAP(v1), or MSCHAP(v2).
7. MPPE Encryption Mode: Check this checkbox to enable MPPE encryption.
Please note that MPPE needs to work with MSCHAP-v1 or MSCHAP-v2
authentication method.
8. Encryption Length: You can choose encryption length of MPPE encryption.
9. User Account: You can input up to 10 different user accounts for L2TP server.
10. Connection Status: The connected L2TP user & connection information will be
shown in this table.
Click on “Save” to store what you just select or” Undo” to give up
3.2.3.5 VPN-L2TP Client
1. VPN-L2TP Client: Enable or Disable L2TP client function.
2. User Account: You can input up to 10 different user accounts for L2TP client,
define each user account settings by clicking on the corresponding “Edit” button
and then check the “Enable” checkbox to enable it.