User's Manual

WiFiBroadbandBG
BDE761AM-001 User Manual   88
3. Name: The name of this rule.
4. Peer IP/Domain: The IP address or Domain name of remote PPTP server.
5. User Name: The user name which is provided by remote PPTP server.
6. Password: The password which is provided by remote PPTP server.
7. Default Gateway: You can check the “Enable” checkbox to set this tunnel as the
default gateway for WAN connection.
8. Peer Subnet: The LAN subnet of remote PPTP server.
9. Connection Control: There are three options for users to choose when the
PPTP tunnel is established. You can choose “Connect-on-Demand”, “Auto
Reconnect (always-on)”, or “Manually”.
10. Option: Enable or disable the MPPE and NAT function. If you enable MPPE,
then this PPTP tunnel will be encrypted.
11. Authentication: You need to enable this option if remote PPTP server requests
it.
12. Authentication Protocol: You can choose authentication protocol as PAP,
CHAP, MSCHAP(v1), or MSCHAP(v2). The protocol you choose must be
supported by remote PPTP server.
13. LCP Echo Type: Choose the way to do connection keep alive.