User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 86
3.2.3.2 VPN-PPTP Server
The VPN gateway can behave as a PPTP server, and allows remote hosts to access
LAN servers behind the PPTP server. The device can support three authentication
methods: PAP, CHAP, MSCHAP(v1) and MSCHAP(v2). Users can also enable MPPE
encryption when using MSCHAP.
1. VPN-PPTP Server: Enable or Disable PPTP server function.
2. Server Virtual IP: The IP address of PPTP server. This IP address should be
different from IP address of L2TP server and LAN subnet of VPN gateway.
3. IP Pool Start Address: This device will assign an IP address to remote PPTP
client. This value indicates the beginning of IP pool.
4. IP Pool End Address: This device will assign an IP address to remote PPTP
client. This value indicates the end of IP pool.
5. Authentication Protocol: You can choose authentication protocol as PAP,
CHAP, MSCHAP(v1), or MSCHAP(v2).
6. MPPE Encryption Mode: Check this checkbox to enable MPPE encryption.