User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 76
Example for adding a “Connection Sessions” type QoS rule:
Control: Set NAT session number as 200.
Direction: Select “Out” for Out-bound traffic only. It is for the client devices under
the Gateway to establish session with servers on the Internet.
Sharing Method: Select “Single” or “Grouping” from the drop list. In this case,
“Single” is selected.
Schedule: leave the default value of “(0)Always” as it is.
This Rule defines that each single user, whose IP address is in the range of
192.168.123.100~120, can access to a remote server on the Internet, and keep a
maximum 200 sessions at the same time.
Finishing QoS settings:
Once you saved the QoS rule, it will be displayed in the Rule List area as below.
Besides, you can move up or down the priority of all rules by clicking on the ‘↑’or ’↓’
icon if you want to change the priority of rules. You can also unmark any rule in the list
if you don’t want to enable it.