User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 75
MAXR Maximum bandwidth Rate KBps/MBps
MINR Minimum bandwidth Rate KBps/MBps
SESSION Connection session Number (1~20000)
5. Direction: Select the traffic direction to be applied for this QoS rule.
Direction
IN In-bond
OUT Out-bond
BOTH In-bond & Out-bond
6. Schedule: The QoS rule can be turn off according to the schedule you
specified. By default, it is always turned on when the rule is enabled.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
Example for adding a “DSCP” type QoS rule:
Grouping: Select “IP” and entry IP Range.
Service: Select “DSCP” and “Source Network Packets” which DiffServ are set as
CS4.
Control: Select “DSCP Marking” and mark these Packets as “AF Class 2”.
Direction: Select “IN” for In-bound traffic only.
Schedule: Leave the default value of “(0)Always” as it is.
This Rule means IP Packets from WAN or other interfaces with DiffServ value of CS4
will be modified with DSCP Marking of “AF Class 2”, then forward corresponding
packets to the Clients whose IP address is in the range of 192.168.12.10~40.