User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 74
internet bandwidth for the forth LAN port (Port4). If you want to enable this
function, check the “Enable” checkbox and enter the allowed bandwidth.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
Create a QoS Rule:
You can click on the button “Add New Rule” shown in the icon above to create a new
QoS rule.
1. Rule: Enable the rule setting first.
2. Grouping: Select the QoS grouping class from the drop list, and specify the
grouping information accordingly.
Grouping Description
IP IP address based
MAC MAC based
3. Service: Set your own “Service” type to enable the QoS rule as below.
Service Description
DSCP DiffServ Code Point
Service Port Mean TCP or UDP Port
Pre-defined Application
profiles
Normal service Application
Connection Sessions NAT Session
4. Control: Set the corresponding control type for the selected service type.
Control Description Data
DSCP
Marking
Priority as you select
DiffServ CodePoint
CS1 ~ AF
PRI Priority 1~6(1 is highest Priority)