User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 71
1. MAC Address Control: Check “Enable” to enable the “MAC Address Control”.
All of the settings in this page will take effect only when “Enable” is checked.
2. Connection control: Check "Connection control" to enable the control of which
wired and wireless clients can connect to this device. If a client is denied to
connect to this device, it means the client can't access to the Internet
consequently. Choose "allow" or "deny" to allow or deny the clients, whose MAC
addresses are not in the "Control table", to connect to this device.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.