User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 61
3.1.6 Routing Setup
If you have more than one routers and subnets, you will need to enable routing function to
allow packets to find proper routing path and allow different subnets to communicate with
each other.
3.1.6.1 Static Routing
.
For static routing, you can specify up to 32 routing rules. The routing rules allow you
to determine which physical interface addresses are utilized for outgoing IP data
grams. You can enter the destination IP address, subnet mask, gateway, and hop
for each routing rule, and then enable or disable the rule by checking or un-checking
the Enable checkbox.
3.1.6.2 Dynamic Routing