User's Manual

WiFiBroadbandBG
BDE761AM-001 User Manual   59
This device provides some predefined settings. Select your application and click
“Copy to” to add the predefined setting to your list.
1. Trigger: The outbound port number issued by the application.
2. Incoming Ports: When the trigger packet is detected, the inbound packets sent
to the specified port numbers are allowed to pass through the firewall.
3. Enable: Check this item to enable the Special AP feature.
Afterwards, Click on “Save” to store your settings or click “Undo” to give up the
changes.
3.1.5.4 NAT Loopback
Allow you to access the external IP address from inside your home or office network.
This is useful when you run a server inside your network.