User's Manual

WiFiBroadbandBG
BDE761AM-001 User Manual   56
Link-Local address”.
3. Address auto configuration settings: Disable or enable this auto configuration
setting. You may set stateless or stateful (Dynamic IPv6), and also check if need
to send Router advertisement messages periodically.
3.1.4.5 IPv6 in IPv4 Tunnel
When “IPv6 in IPv4 Tunnel” is selected you need to do the following settings:
1. IPv6 in IPv4 Tunnel Settings: you may add remote / local IPv4 address and
local IPv6 address, then set DNS address manually for Primary DNS address
and secondary DNS address.
2. LAN IPv6 address setting: LAN IPv6 address and LAN IPv6 Link-Local
address.
3. Address auto configuration setting: Disable or enable this auto configuration
setting. You may set stateless or stateful (Dynamic IPv6), and also check if need
to send Router advertisement messages periodically.