User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 55
A. Auto-configuration: Disable or enable this auto configuration setting.
B. Auto-configuration type: You may set stateless or stateful (Dynamic IPv6).
C. Router advertisement Lifetime: You can set the time for the period that the
router send (broadcast) its router advertisement. Each router periodically
multicasts a Router Advertisement from each of its multicast interfaces,
announcing the IP address(es) of that interface. Hosts discover the
addresses of their neighboring routers simply by listening for advertisements.
When a host attached to a multicast link starts up, it may multicast a Router
Solicitation to ask for immediate advertisements, rather than waiting for the
next periodic ones to arrive; if and only if no advertisements are forthcoming,
the host may retransmit the solicitation a small number of times, but then
must desist from sending any more solicitations. Any routers that
subsequently start up, or that were not discovered because of packet loss or
temporary link partitioning, are eventually discovered by reception of their
periodic (unsolicited) advertisements.
3.1.4.4 6 to 4
When “6 to 4 IPv6” is selected you need to do the following settings:
1. 6 to 4 Settings: You may obtain IPv6 DNS automatically or set DNS address
manually for Primary DNS address and secondary DNS address.
2. LAN IPv6 address settings: Enter “LAN IPv6 address” and “LAN IPv6