User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 54
must desist from sending any more solicitations. Any routers that
subsequently start up, or that were not discovered because of packet loss or
temporary link partitioning, are eventually discovered by reception of their
periodic (unsolicited) advertisements.
3.1.4.3 PPPoE
When “PPPoE” is selected you need to do the following settings:
1. WAN IPv6 address settings:
A. Username: enter the Username that you got from your ISP
B. Password: enter the Password that you got from your ISP
C. Service Name: enter the Service Name that you got from your ISP
D. Reconnection Mode: leave the setting as “AutoReconnect (always-on)”
E. Max. Idle Time: give max. idle time that you want here
F. MTU (Maximum Transmission Unit): Most ISP offers MTU value to users.
The default MTU value is 0 (auto).
2. LAN IPv6 address settings: Please enter “LAN IPv6 address” and ignore the
“LAN IPv6 Link-Local address”.
3. Address auto configuration settings: