User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 46
2. AP PIN: You can press Generate New Pin to get an AP PIN.
3. Config Mode: Select your configuration Mode from “Registrar” or “Enrollee”. For
a AP router or AP, it should be in “Registrar” mode, so that other wireless clients
in “Enrollee” mode can connect to the discovered “Registrar”.
4. Config Status: It shows the status of your configuration.
5. Config Method: You can select the Configuration Method here from “Pin Code”
or “Push Button”.
6. WPS status: According to your setting, the status will show “Start Process” or
“No used”.
Press “Wireless Clients List”, and the list of connected wireless clients will be
shown consequently.
3.1.3.1.2 WDS Hybrid Mode
While acting as a wireless Bridge, Wireless Router 1 and Wireless Router 2 can
communicate with each other through wireless interface (with WDS). Thus All
Stations can communicate each other and are able to access Internet if Wireless
Router 1 has the Internet connection
.