User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 44
Regulatory Domain. The factory default setting is auto channel selection.
10. Wireless Mode: Choose “N only”, “G/N mixed” or “B/G/N mixed”. The factory
default setting is “B/G/N mixed”.
11. Authentication & Encryption: You may select one of the following
authentications to secure your wireless network: Open (include 802.1x), Shared,
Auto, WPA-PSK, WPA, WPA2-PSK, WPA2, WPA-PSK/WPA2-PSK, or WPA
/WPA2.
z Open
Open system authentication simply consists of two communications. The first
is an authentication request by the client that contains the station ID (typically
the MAC address). This is followed by an authentication response from the
AP/router containing a success or failure message. An example of when a
failure may occur is if the client's MAC address is explicitly excluded in the
AP/router configuration.
z Shared
Shared key authentication relies on the fact that both stations taking part in the
authentication process have the same "shared" key or passphrase. The
shared key is manually set on both the client station and the AP/router. Three
types of shared key authentication are available today for home or small office
WLAN environments.
z Auto
The AP will Select the Open or Shared by the client’s request automatically.
z WPA-PSK
Select Encryption mode and enter the Pre-share Key. You can fill in 64
hexadecimal (0, 1, 2…8, 9, A, B…F) digits, or 8 to 63 ASCII characters as the
pre-share key.
z WPA
Select Encryption mode and enter RADIUS Server related information. You
have to specify the IP address, and port number for the RADIUS Server, and
then fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits, or 8 to 63 ASCII
characters as the shared key. The key value is shared by the RADIUS server
and this router. This key value must be consistent with the key value in the
RADIUS server.
z WPA2-PSK
Select Encryption mode and enter the Pre-share Key. You can fill in 64
hexadecimal (0, 1, 2…8, 9, A, B…F) digits, or 8 to 63 ASCII characters as the
pre-share key.
z WPA2
Select Encryption mode and enter RADIUS Server related information. You