User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 43
1. Wireless Module: Enable the wireless function.
2. Wireless Operation Mode: Choose “AP Router Mode” from the list.
3. Green AP: Enable the Green AP function to reduce the power consumption
when there is no wireless traffics.
4. AP Number: This device supports up to 8 SSIDs for you to manage your
wireless network. You can select AP1 ~ AP8 and configure each wireless
network if it is required.
5. Wireless Schedule: The wireless radio can be turn off according to the schedule
rule you specified. By default, the wireless radio is always turned on when the
wireless module is enabled.
6. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN).
Client stations can roam freely over this device and other Access Points that
have the same Network ID. (The factory default setting is “default”)
7. SSID Broadcast: The router will broadcast beacons that have some information,
including SSID so that wireless clients can know how many AP devices by
scanning the network. Therefore, if this setting is configured as “Disable”, the
wireless clients can not find the device from beacons.
8. WLAN Partition: You can check the WLAN Partition function to separate the
wireless clients. The wireless clients can’t communicate each other, but they can
access the internet and other Ethernet LAN devices.
9. Channel: The radio channel number. The permissible channels depend on the