User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 35
3. Server IP Address / Name: The IP address of the PPTP server and
designated Gateway provided by your ISP.
4. L2TP Account and Password: The account and password your ISP
assigned to you. For security, this field appears blank. If you don't want to
change the password, leave it blank.
5. MTU : Most ISP offers MTU value to users. The default MTU value is 0
(auto)
6. MPPE (Microsoft Point-to-Point Encryption): Enable or disable this
function.
7. Multicast: Enable or disable multicast traffics from the internet. You may
enable as auto mode or select by IGMP v1, IGMP v2, IGMP v3.
8. IGMP Snooping: Enable or disable IGMP snooping function. If you enable
the IGMP snooping function, this device will detect all IGMP messages
exchanged on the link and will maintain a table indicating for each of the
interfaces, what multicast groups should be forwarded. This simple solution
easily prevents multicast flooding on an Ethernet link.
9. Disable PPTP / L2TP / IPSec Passthrough: By default, the device allows
the PPTP / L2TP / IPSec VPN traffic that initiated from local VPN client to
pass through to Internet. If you want to disable such function, just change
the setting to disable it.
10. WAN IP alias: The device supports 2 WAN IP address, one is for primary
connection that provides users/devices in the LAN to access Internet; the
other is a virtual connection that let remote user to manage this device.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.