User's Manual

WiFiBroadbandBG
BDE761AM-001 User Manual   29

3.1.1.2.2.2 Static IP Address
Select this option to give your static IP information. You will need to enter in the
IP address, subnet mask, and gateway address, provided to you by your ISP.
Each IP address entered in the fields must be in the appropriate IP form, which is
four IP octets separated by a dot (x.x.x.x). The Router will not accept the IP
address if it is not in this format.
1. WAN Type: Choose “Static IP Address” from the drop list
2. WAN IP address/ Subnet Mask/ Gateway: Enter the IP address, subnet
mask, and gateway address, provided to you by your ISP.
3. Primary DNS/ Secondary DNS: input the Primary/Secondary DNS if
necessary.
4. MTU: Most ISP offers MTU value to users. The default value is o (auto)
5. NAT disable: If you enable this option, it will act with a non-NAT function.
6. Multicast: Enable or disable multicast traffics from the internet. You may
enable as auto mode or select by IGMP v1, IGMP v2, IGMP v3.
7. IGMP Snooping: Enable or disable IGMP snooping function. If you enable