User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 28
1. WAN Type: choose “Dynamic IP Address” from the drop list
2. Host Name: Optional, required by some ISPs, for example, @Home.
3. ISP registered MAC Address: Enter the WAN MAC address of this device.
(Optional)
4. MTU: Most ISP offers MTU value to users. The default value is o (auto)
5. NAT disable: If you enable this option, it will act with a non-NAT function.
6. Multicast: Enable or disable multicast traffics from the internet. You may
enable as auto mode or select by IGMP v1, IGMP v2, IGMP v3.
7. IGMP Snooping: Enable or disable IGMP snooping function. If you enable
the IGMP snooping function, this device will detect all IGMP messages
exchanged on the link and will maintain a table indicating for each of the
interfaces, what multicast groups should be forwarded. This simple solution
easily prevents multicast flooding on an Ethernet link.
8. Disable PPTP / L2TP / IPSec Passthrough: By default, the device allows
the PPTP / L2TP / IPSec VPN traffic that initiated from local VPN client to
pass through to Internet. If you want to disable such function, just change
the setting to disable it.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.