User's Manual
WiFiBroadbandBG
BDE761AM-001 User Manual 24
device, there are “Ethernet” and “3G/4G” items. If you would like the RJ45 WAN
port to operate as the primary internet connection, Please choose “Ethernet”;
Otherwise, choose “3G/4G” for configuring the embedded 3G/4G modem as
primary WAN connection.
4. Line Speed (Kbps): You can specify the downstream / upstream speed for the
corresponding WAN connection. Such information will be referred in QoS and
load balance function to manage the traffic load for each WAN connection.
5. VLAN Tag Insertion, Tag Value: If your ISP required a VLAN tag been inserted
into the WAN packets, you can enable this setting, and enter the specified tag
value.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
3.1.1.2 Network Setup
There are two physical WAN interfaces that you can configure one by one to get
proper internet connection setup. They include the Wireless WAN - the remote
wireless ISP such as 3G (WCDMA, HSxPA, HSPA+, CDMA2000, EV-DO,
TD-SCDMA), and the Ethernet WAN - the DSL ISP such as Dynamic IP, Static IP,
PPPoE, PPTP and L2TP
3.1.1.2.1 Wireless WAN – 3G/4G
Click on the “Edit” button for the 3G/4G WAN interface and you can get the detail
WAN settings and then configure the settings as well.